Salter Style Paediatric Nasal Cannula w/ Tubing
Stock: Back order
These Salter Style Pediatric Oxygen Cannulas come with 3 Channel Tubing which is able to maintain a constant flow of oxygen for smaller patients with many of the same benefits as the adult size tubing such as the ones.
The cannula is recommended for use with younger patients as the size of the mask is able to cover gaps around the chin and cheeks to prevent the loss of oxygen. We want your little patient to get well soon, and quickly too. This can be achieved with the correct size of the mask to make sure the infant gets all of the oxygen to help them recover. The nasal cannula features an over-the-ear design to prevent the cannula from coming off by tossing and turning. The over-the-ear design is traditional in most cannulas for convenient reasons. When the cannula is placed on, it can be worn while sleeping without falling off; thanks to this design.
For patients using oxygen therapy, the cannula can support a rate of up to 6 litres per minute - your doctor will be the one to set the indicated rate depending on the needs of the child. With a curved, non-flared tip, a comfortable design helps keep the cannula inserted for longer without irritations to the nostrils.
An included 3-channel tubing safety design keeps the flow of oxygen to the up-most rate, meaning if there is a clog or backing into the cannula, it will not prevent the flow of oxygen and always be constant. The tubing that comes with the cannula is of decent length. One thing to mention is the oxygen cannula is not made with natural rubber latex to be used with many small patients.
Product Features and Benefits
- Pediatric Size Fits Best for Younger Patients
- Nasal Cannula, Over the Ear Style
- Standard Cannula Connector
- Curved, Non-Flared Tips
- 6 Litres Per Minute
- Not Made with Natural Rubber Latex
More About Salter Nasal Cannula
Instructions for Use:
- Wash hands. Remove pediatric nasal cannula from package.
- Attach end connector to oxygen source, e.g., oxygen tubing or oxygen flowmeter
- Adjust flow control knob to the prescribed liter flow. Check for gas flow from the nasal prongs.
- Position the Salter Style Children Nasal Cannula with the nasal prongs facing upward and curved toward the face. Insert the two nasal prongs into the nostrils.
- Wrap the headset loop up and over both ears. Alternative placement: Secure headset loop behind head.
- Squeeze the sides of the bolo and glide the bolo up under your chin. Leave enough space to fit at least two fingers between the bolo and chin.
Care and Cleaning Instructions:
- Do not sterilize oxygen cannula. Do not reuse.
- Once a day, use a clean damp cloth to wipe off the nasal prongs and headset tubing.
- Replace infant nasal cannula once every 7 days. Replace if it becomes soiled or damaged.
- Do not allow the patient or anyone around them to smoke. This includes the use of electronic cigerattees, pipes, cigars and cigerattes. Although, oxygen is a non-flammable gas, it does support combustion.
- Keep oxygen equipment at least 6 feet away from flames or any heat source.
- Do not use petroleum based products or oil-based creams and lotions in or around the patients nose.
- Do not use flammable products such as aerosol sprays or cleaning products near the oxygen source.
- Avoid using electrical equipment that may cause a spark; for example, hair dryers electric razor, and electric toothbrushes.
- Follow physician prescription for oxygen use.
- The total length of the Salter Style Children Nasal Cannula and oxygen tubing should not exceed 57 feet to ensure there is enough pressure to deliver prescribed oxygen flow rate.
- Do not kink, bend or tie the oxygen tubing.
- Do not place anything on top of oxygen cannula and oxygen tubing that could obstruct flow.
- Keep excess tubing loosely coiled and out of the way to prevent tripping on oxygen tubing.
- Do not place oxygen tubing or nasal cannula under blankets, bedsheets, etc.
- Do not let children play with oxygen equipment.
- Use of swivel connector can help prevent tubing from twisting.