Cashback Sale: ResMed AirFit F30 Full Face Mask

RRP: AU$299.00 OUR PRICE: AU$195.00

Stock: In Stock

Please select your size

Add 2x Unscented Wipes for only $23 (RRP $33)

CURRENT OFFERS: 

$$$

Cashback

Click HERE to find out how. 
Offer now extended to the 30th June 2020!

  

FOR A LIMITED TIME, GET 30 DAYS MONEY BACK GUARANTEE ON SELECT RESMED PRODUCTS

We're determined to help you sleep well. If you're not completely satisfied, talk to our team to find your perfect match, or you can return your purchase within 30 days of the purchase for a full refund or exchange. It's peace of mind you take home for a better night's sleep.
Terms and Conditions apply.

Promotion Valid from 1 May to 31 July 2020.


Small, quiet and designed for freedom, the AirFit F30 delivers full-face functionality in an ultra-compact format. With nothing on your nose, there's no risk of red marks or discomfort on the bridge of your nose.

Key Features:

  • The under-the-nose design means freedom from red marks on the bridge of your nose.
  • Sophisticated elbow features quick-release technology for easy connection and disconnection at night and 360 rotation capability for greater good freedom of movement.
  • QuietAir vent gently diffuses exhaled air to minimise noise and disturbance, making it one of ResMed's quietest full-face interfaces.
  • Convenient, intuitive magnetic clips guide the headgear to the frame in seconds for a fast to fit and easy to take on and off.¹

Available in the following sizes:

  • Small
  • Medium

Please Note: The F30 is designed to work with standard full size CPAP devices. The F30 maybe used with the ResMed Airmini travel device but requires a special connector designed to fit with the tubing on the Airmini. A link to the F30 airmini connector can be found below in the related products section.



F30 User Guide

F30 Patient Brochure



Authenticity guarantee: All of our ResMed products are sourced directly from ResMed Australia. 

Sizing

Please use the following guideline to select your size. Please print this to scale | F30 Sizing Template

You will have to cut out your guide from the document you print. 

Once you have your sizing guide:

  • Standing in front of a mirror, hold the template horizontally in front of your face and place it under your nose. Make sure it's directly under the nostrils rather than on the top of the nose.
  • Select the matching ultra-compact cushion size (small or medium) based on where the outer edge of your nostrils contacts the template. Cushion size is based on the width of your nose (rather than its length).
  • If the width of your nose breaches the template margins, size up to a medium

FITTING

  1. Twist and pull both magnetic clips away from the frame.
  2. Place the cushion under your nose and ensure it sits comfortably against your face. With the ResMed logo on the headgear facing up, pull the headgear over your head.
  3. Bring the lower headgear straps under your ears and attach the magnetic clips to the frame.
  4. Undo the fastening tabs on the upper headgear straps and pull evenly. Repeat with the lower headgear straps.
  5. If the headgear is too close to the ear, adjust the top headgear strap
  6. Connect the device air tubing to the elbow and attach the elbow to the F30, ensuring that it clicks in place.

daily Cleaning

  1. Soak the elbow, frame and cushion in warm water with a mild liquid detergent. Ensure that there are no air bubbles while soaking.
  2. Shake the components vigorously in the water for at least one minute and hand wash with a soft bristle brush. Pay particular attention to all connection areas, elbow vent holes and valves.
  3. Thoroughly rinse the components under running water.
  4. Leave the components to air dry out of direct sunlight.

If the F30 components are not visibly clean, repeat the cleaning steps.

weekly cleaning

  1. Soak the elbow, frame and cushion and headgear in warm water with a mild liquid detergent. Ensure that there are no air bubbles while soaking.
  2. Shake the components vigorously in the water for at least one minute and hand wash with a soft bristle brush. Pay particular attention to all connection areas, elbow vent holes and valves.
  3. Thoroughly rinse the components under running water.
  4. Squeeze the headgear to remove excess water. Leave the components to air dry out of direct sunlight.

Assembly

  1. With the ResMed logo facing outwards and up, insert the upper headgear straps into the frame from the inside and fold the fastening tabs over to secure.
  2. Hold the top and bottom of the cushion and attach to the frame.
  3. Attach the elbow to the frame.

disassembly

  1. Undo the fastening tabs on the upper headgear straps and pull them from the frame. Keep the magnetic clips attached to the lower headgear straps.
  2. Squeeze the side buttons on the elbow and detach from the frame.
  3. Hold the top and bottom of the cushion and separate from the frame.