SPECIAL: ResMed AirFit P10 Nasal Pillow CPAP Mask for Her

RRP: AU$289.00 OUR PRICE: AU$169.00

Stock: In Stock

Add a spare Mask Cushion to your mask order for a discounted price. Simply select a size from below and receive an extra cushion, to use as a backup or replacement.

Add a spare P10 For Her Fabric Headgear to your mask order to use as a backup or replacement.

Add 2x Unscented Mask Wipes for only $23 (RRP $33)

RESMED Airfit p10 for her

ResMed’s lightweight AirFit P10 for Her nasal pillows mask is a quiet achiever. It offers you comfort and reliability at barely a whisper, thanks to its innovative QuietAir™ woven mesh vent. This ultra-quiet vent provides advanced air diffusion that significantly reduces disturbance, by gently directing air away from both you and your bed partner. Mask comes with three sizes of pillow - XS, S and M.


This is a standard mask designed to work with most full size CPAP devices. If you are looking to use this Mask with the ResMed Airmini CPAP Device - An Airmini P10 Connector is required. To purchase an Airmini P10 Mask Complete kit click HERE. To purchase just the Airmini P10 Connector click HERE.


We're determined to help you sleep well. If you're not completely satisfied, talk to our team to find your perfect match, or you can return your purchase within 30 days of the purchase for a full refund or exchange*. It's peace of mind you take home for a better night's sleep.
*Terms and Conditions apply.

Promotion Valid to 30 June 2021.

*Full refund only applies to the selected ResMed products listed in the T&Cs, if your mask choice is not one of the eligible masks, your refund amount will be less the cost of your mask.

Authenticity guarantee: All of our ResMed products are sourced directly from ResMed Australia. 


  1. Thread each arm of the frame through the fabric openings in the headgear so that the grey side faces out and coloured side faces in.
  2. Ensure the headgear is secured by pulling the fabric over the bottom edge of each headgear node.
  3. Insert the pillows into the mask frame by pressing it in until the top and bottom clips click together.
  4. If humidification is used, simply place the HumidX or HumidX Plus into the vent module.
  5. Connect the AirMini tubing to the vent module by pushing their ends together and turn until they click into place.
  6. Lastly, connect the air tube by twisting it into the bottom of the vent module.


  1. Take the mask apart into its main component parts, namely the nasal pillows, frame and mask tube.
  2. Remove the HumidX before proceeding with cleaning.
  3. Gently rub each part in warm water (~30°C or 86°F) and mild liquid detergent until clean, with attention paid to the pillows and its small openings.
  4. Rinse well under running water and allow to air dry out of direct sunlight.


  1. Take the mask apart into its main components parts, namely the frame, mask tube and the fabric headgear.
  2. Remove the HumidX before proceeding with cleaning.
  3. Gently scrub the frame and its elbow area in warm water (~30°C or 86°F) and mild liquid detergent with a soft bristle brush.
  4. Rub and squeeze the headgear in warm water (~30°C or 86°F) and mild liquid detergent until clean.
  5. Rinse both the headgear and frame under running water until the water is clear. Ensure you also squeeze the headgear while rinsing.
  6. Allow both to air dry out of direct sunlight.


  1. While therapy is running, place your fingers around the upper and lower areas, where the mask seals to the face, to check if air is escaping.
  2. If there are leaks, try adjusting the headgear to help with mask fit. Simply spread them apart to loosen and draw them together to tighten.
  3. You can also readjust the pillows by pulling briefly on the mask away from your nose to reseat them.
  4. Once the mask is secure and comfortable, you’re ready to start therapy.

Note: When the device is running, a light breeze should be felt at the base of the vent module, but there should be no other areas of air leak. If leak occurs or continues, try refitting the cushion into the frame.